JKS JSPEC174KFP - J-Konnect 2" Lift Kit | Fox 2.0 Performance Shocks

JKS - JSPEC174KFP

J-Konnect 2" Lift Kit | Fox 2.0 Performance Shocks

J-Konnect: Builds on J-Venture with heavy-duty J-Link lower control arms to improve strength and correct geometry.

For serious off-road use, step up to a JKS J-Konnect 2" suspension system for your JL Wrangler 4xe. J-Konnect™ can tackle aggressive terrain including rocks and ruts without giving up street manners or breaking the bank. J-Konnect system takes suspension component strength and suspension geometry a step further by adding front and rear fixed-length J-Link lower control arms along with a drag link flip kit and track bar braces. In addition to being significantly stronger than factory control arms, J-LINK lower control arms add front caster and rear wheelbase. Built from 2” x .250-wall DOM tubing, J-LINK control arms provide street-friendly NVH isolation with large factory style rubber bushings at both ends. The drag link flip kit flattens the steering angle to mimic factory angles, while the track bar adds strength and protection. Combined with the matched dual-rate coil springs, your selection of Jspec of Fox shocks, an adjustable track bar, Quicker Disconnect sway bar end links, and more. J-Konnect™ is ready for aggressive trail performance. Get connected with J-Konnect.

• Front/Rear Dual Rate Coil Springs (standard or HD) designed to great ride quality across any terrain
• HD springs offer additional load capacity for vehicles equipped with winch bumper, fullsize spare, roof rack, etc.
• Front/Rear Gas Shocks (JSPEC or FOX 2.0) specifically valved for this suspension system for improved performance on and off-road
• Front Adjustable Track Bar and Rear Track Bar Bracket to correct axle positioning under vehicle
• Front Sway Bar Quicker Disconnects and Rear Sway Bar Links for increased offroad articulation
• Front/Rear Bump Stop Extensions to properly limit suspension up travel
• Front/Rear J-Link Lower Control Arms to add strength and correct caster