Description
Injen - EVO1102
Evolution Series Air Induction System
EVOLUTION Cold Air Intake System, Part No. EVO1102, 2015-2018 BMW M3 L6-3.0L Twin Turbo (F80), 2015-2020 BMW M4 L6-3.0L Twin Turbo (F82/83), 2019-2020 BMW M2 Competition L6-3.0L Twin Turbo (F87).
SuperNano-Web Dry Air Filters: The SuperNano-Web Dry air filter is uniquely designed to work with the Injen Technology Twist-Lock System (Patent Pending). The Twist-Lock system has allowed our engineers to use one of the largest filters possible to increases air volume while keeping the installation process simple., , Quality Hardware: Stainless Steel Band Clamps with inner protective liner and reinforced automotive grade silicone couplers are used to provide the most secure installation available. , , Hassle-Free Installation: Created and designed 100% in 3D, our Evolution cold air intakes fit on a level equal to or above the OE system. Clean lines that flow with the entire engine compartment really set this intake apart from the competition. This Evolution cold air intake system also utilizes our all-new Twist-Lock System (Patent Pending) to provide the end user with one of the quickest and simplest installations available today., , Dyno Results: After hours of design and dyno testing, This Evolution Air Intake system was putting down 22 additional horsepower and 27 lbs. of torque. That?s power that you?ll instantly feel. ,
- Dyno Proven gains of up to 22 hp and 27 lb-ft. of torque
- Designed to work with the stock calibration
- Aggressive intake growl under acceleration
- Durable Roto-Molded Polyethylene tubes and housings
- Twist-Lock Technology to securely integrate the air filter to the housing
- Reinforced automotive grade silicone couplers
- Fully serviceable Injen SuperNano-Web dry air filter
- Replacement air filter # X-1097-BB
- Stainless steel band clamps with inner protective liner
- Aggressive underHood appearance while maintaining an OE fit
- Our clear inspection badge allows you to quickly check the condition of your air filter while the red stripe enhances underHood appearances.
- Made in Pomona, California USA
- Injen Technology Limited Lifetime Warranty
- This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.
- Patent Pending
Extra Information
Warranty Information
[{"VehicleId":211275},{"VehicleId":211274},{"VehicleId":229175},{"VehicleId":229176},{"VehicleId":237742},{"VehicleId":237743},{"VehicleId":246184},{"VehicleId":247467},{"VehicleId":247779},{"VehicleId":256486},{"VehicleId":256489},{"VehicleId":256488},{"VehicleId":261047},{"VehicleId":261381},{"VehicleId":261099},{"VehicleId":275805},{"BaseVehicleId":147747,"SubModelId":2017,"EngineBaseId":180},{"BaseVehicleId":149141,"SubModelId":2017,"EngineBaseId":180},{"BaseVehicleId":129890,"EngineBaseId":180},{"BaseVehicleId":136854,"EngineBaseId":180},{"BaseVehicleId":139858,"EngineBaseId":180},{"BaseVehicleId":143788,"EngineBaseId":180},{"BaseVehicleId":129891,"EngineBaseId":180},{"BaseVehicleId":136853,"EngineBaseId":180},{"BaseVehicleId":139859,"EngineBaseId":180},{"BaseVehicleId":143795,"EngineBaseId":180},{"BaseVehicleId":147748,"EngineBaseId":180},{"BaseVehicleId":149142,"EngineBaseId":180},{"BaseVehicleId":153903,"SubModelId":2017,"EngineBaseId":180}]
