Holley EFI - 300-124BK
Holley LS Hi-Ram EFI Manifold-Black GM LS7
LS7 EFI w/ 92MM Throttle Body
• Intended for use on N/A or forced induction engines in the 6.0 to 7.0+ liter range, max power at 7000-8000+RPM.
- Runner Length – 6.29”, As-Cast Runner Cross-Sectional Area – Tapered 4.67in² to 2.84 in²
- Throttle Body Flange Location, with 92/102mm EFI Plenum Top : Height – 8.42” (from engine block lifter valley cover flange), Longitudinal Location – 3.84” (forward from engine block front flange), Angle – 25 deg. (down from vertical)
- Plenum Top Gasket Type – 3/32” Round O-ring Cord
- Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
- Port Size – 2.49” Height x 1.21” Wide
- Total Height with 92/102mm EFI Plenum Top – 12.32” to the lifter valley cover flange on engine block.
- Base Plenum Top Mounting Flange Height – 8.42” to the lifter valley cover flange on engine block.
Basic Operating RPM Range: 3500-8000 RPM
Brand: Holley EFI
Category: Intake Manifolds
Color: Black
Construction: Cast
EGR Port: No
Emission Code: 4
Engine: GM LS7
Finish: Black
Flange Style: EFI
Front Height: 12.32 inch
Front Maximum Height: 12.32 IN
Fuel System Type: EFI
Grade Type: Performance
Intake Port Gasket(s) Included: No
Manifold Type: Hi-Ram
Material: Aluminum
Nitrous Bung(s) Included: No
Plenum Finish: Black
Product Type: Intake Manifold
Rear Height: 11.00 inch
Rear Maximum Height: 11 IN
Recommended Use: Forced Induction
Removable Runners: No
RPM Power Band: 3500-8000 RPM
Single Or Dual Plane Type: Single Plane
Throttle Body Bore Diameter: 92 MM
Throttle Body Included: No
Warning: California Proposition 65
Warranty: Limited 90 Day
