Description
Ford Racing - M-6007-Z460FRT
Crate Engine - Base Engine - 460 Cubic Inch - 575 HP - Big Block Ford - Each
Boss Crate Engine; 460 cu. in.; 575 HP at 5500 RPM; 575 ft.-lbs. Torque at 4700 RPM; w/Rear Sump; 4.150 in. Bore x 4.250 in. Stroke;
Ford Performance has taken its Boss Block to the max with the biggest small block Windsor crate engine ever - the Z460. With 575 horsepower and 575 Lb. Ft. of torque, Z460 packs a pump gas fueled punch that works well on the street and on the track. The foundation of Z460 is the legendary Ford Performance Boss block topped off with high port/high flow Z-Heads. Premium components from the best aftermarket companies are used throughout the engine, like a SCAT(R) forged steel crankshaft, SCAT(R) forged H-beam connecting rods, forged Mahle(R) pistons and Clevite(R) bearings. And every Ford Performance Z460 engine is hand assembled in the U.S. with performance clearances. Oil Pan: Rear sump (7quart) pan with louvered windage tray and crankshaft scraper M-6675-DRS351; Water pump: Ford Performance M-8501-G351 included - long type - standard rotation; Distributor: not included. Steel distributor gear required; Required fuel: Premium Unleaded; Ignition timing: 32° at 4,000 RPM; Maximum recommended rpm: 5,600 RPM; Balanced: Internal use neutral balance flywheel; Recommended intake: Edelbrock PN 2924 Super Victor (not included); New block, oil and water pump, performance oil pan and high-performance harmonic balancer; Engine power ratings achieved with Edelbrock(R) Super Victor intake, Holley(R) 850 CFM carburetor, long tube headers.
- Engine Type 351 Based Small Block Ford; 460 cu. in. Displacement
- Boss 351 Block w/9.5 in. Deck
- SCAT® Forged Steel Crankshaft
- SCAT® Forged Steel H-Beam w/6.125 in. Conn. Rods w/Floating Pins
- Forged Mahle® Pistons w/Floating Wrist Pins
- Hydraulic Roller Camshaft w/0.594/0.618 in. Lift
- Ford Performance M-6049-Z304DA Aluminum Z Cylinder Heads
- Valve Size 2.02 Intake/1.60 Exhaust
- Compression Ratio: 10.0:1 (Nominal)
- Rocker Arm Ratio: 1.65:1
- Vibration Damper- Ford Performance M-6316-D302 SFI Approved
- Valve Covers: Ford Performance 302-137 Cast Aluminum Gray Crinkle
