null

Edelbrock 60879 - Single Perf 5 7 Corvette Head Comp

Write a Review
SKU:
EDEL-60879

Description

Edelbrock - 60879

Performer Series Centerbolt Cylinder Head

The Small-block Chevy cylinder head is designed for 1987-95 Throttle Body Injected (T.B.I.) and Tuned Port Injected (T.P.I.) 5.7L S/B Chevy engines originally equipped with centerbolt valve covers. Performer centerbolt cylinder heads are 50-state street legal and accept factory centerbolt valve covers. The intake bolt pattern utilizes the 1987-95, 73° angle on the two center bolts. Will maintain stock compression ratio when used with the recommended head gasket. The Corvette centerbolt cylinder head is designed for 1986-91 Tuned Port Injected (T.P.I) 5.7L small-block Chevy Corvette engines originally equipped with centerbolt valve covers. Performer centerbolt cylinder heads are 50-state street legal and accept factory centerbolt valve covers. The intake bolt pattern utilizes the 1986-91 (straight) 90° angle on all bolts. Spark plugs are angled like stock O.E. heads. INSTALLATION NOTE: Match with Edelbrock head gasket sets. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Edelbrock pushrods #9632 are recommended. Requires hardened pushrods. Pedestal mount rockers. When using hot air choke Q-Jet carbs, choke kit #1932 is required. Intended for use on small-bore (3.736" - 4.00") 265, 283, 305 & 307 engines. Deck thickness: 9/16", rocker stud diameter: 3/8", pushrod diameter: 5/16" (width of slot in guide plate).

  • 50-State Street Legal Aluminum Cylinder Head
  • Out-of-the-Box Bolt-On Performance
  • 60cc Combustion Chambers Improve Performance

EGR Port: Yes
RGL: WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Construction Type: Complete
Exhaust Valve Diameter: 1.60
Series: Performer
Family: Performer
Rotor Center Bore Inside Diameter: angled
Valve Spring Diameter: 1.46
Quantity: Sold Individually
Horsepower: 250-425
Seat Material: Ductile Iron
Retainer Included: Yes
Valve Included: Yes
Combustion Chamber Volume: 60
Intake Valve Diameter: 2.02
Valve Angle: 23
Guide Plate Material: Hardened Steel
Seat Angle: Exhaust 45 deg/Intake 45
Camshaft Type: Flat Tappet
Valve Springs Included: Yes
9040: D-215-94
Exhaust Port Location: Standard
Grade Type: Performance
Valve Spring Maximum Lift: 0.575
Head Casting Number: N/A
Guide Material: Manganese Bronze
Valve Stem Diameter: 0.3438
Push Rod Diameter: (Suggested) 0.3125
Deck Thickness: 0.625
Rocker Arm Stud Diameter: 0.375
CNC Ported: No
Material: Aluminum
Guide Plates Included: Yes
Exhaust Runner Volume: 65
Intake Runner Volume: 165

Extra Information

Brand:
Edelbrock
Stock:
0
Vendor:
Turn14 - CSR
SpecialOrder:
True
CarbRejected:
False
CouponIsOn:
False
StockEta:
N/A
ProfitMargin:
8.800
CostOfItem:
774.15
ItemPopularity:
0
MapPrice:
874.23
RetailPrice:
N/A
EbayAllowed:
False

Warranty Information

[{"BaseVehicleId":3208,"EngineBaseId":62},{"BaseVehicleId":3222,"EngineBaseId":62},{"BaseVehicleId":3223,"EngineBaseId":62},{"BaseVehicleId":3220,"EngineBaseId":62},{"BaseVehicleId":3221,"EngineBaseId":62},{"VehicleId":6352},{"VehicleId":6339},{"VehicleId":6353},{"VehicleId":6356},{"VehicleId":6355},{"VehicleId":6354}]