Edelbrock - 2220
Hydraulic Roller Camshaft Kit
Edelbrock Performer RPM Hydraulic Roller Camshaft #2220 for 390-427 Ford FE Engines
These complete cam kits include an Edelbrock Rollin' Thunder(TM) hydraulic roller camshaft, Edelbrock improved hydraulic roller lifters and pushrods that are dyno-matched for a trouble-free installation. Each kit includes an Edelbrock Rollin' Thunder Hydraulic Camshaft, hydraulic roller lifters, lifter guides, hold-down spider (only on 1987-later applications) and pushrods. These kits can produce great performance gains when matched with the rest of the Edelbrock Total Power Package.
- Complete Kit Gives You Everything You Need To Upgrade Your Cam
- Cam Features More Aggressive Profiles w/o Excessive Valve Overlap
- Virtually Eliminate Break-In Problems
- No Special Break-In Required Over Flat Tappet Cams
- Higher Lift Velocity and Faster Valve Action Produces HP/Torque
- Get More HP/Torque w/o Sacrificing Idle Quality/Manifold Vacuum
- Reduces Friction And Improve Fuel Economy
Exhaust Cam Lift at Lobe: 0.367
Intake Valve Lift with Factory Rocker Arm Ratio: 0.618
Intake Cam Lift at Lobe: 0.351
Advertised Intake Duration: 229
Basic Operating RPM Range: 1500-6500
Intake Timing at .050 inch Lift: Opens: 6.87 BTDC; Closes: 41.79 ABDC
Computer Controlled Compatible: No
Exhaust Valve Lift: 0.647
Intake Centerline: 107.13
RGL: WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Quantity: Sold Individually
Intake Duration at .050 Inch Lift: 228.7
Exhaust Centerline: 117.13
Cam Type: Hydraulic Roller
Lifter Type: Hydraulic Roller
Exhaust Duration at .050 inch Lift: 236.3
Exhaust Timing at .050 inch Lift: Opens: 51.16 BBDC; Closes: 5.11 ATDC
Advertised Exhaust Duration: 236
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.647
Lobe Separation: 112.1
Intake Valve Lift: 0.618
