Dinan D100-0925 - Performance Coil Spring Set

Write a Review
SKU:
DIN-D100-0925

Description

Dinan - D100-0925

Dinan Performance Spring Set - 2007-2013 BMW 328i/335i

Performance Coil Spring Set; 1/8 in. Front And Rear Lowering; Includes 2 Front And 2 Rear Springs;

Dinan's Performance Spring set for the E93 328i (RWD) & E90 335i (xDrive) provides greater control over body roll by virtue of carefully calibrated spring rates. Additionally, Dinan lowers the vehicle by a 1/8" in front and 1/8" in the rear for improved suspension geometry and an even more aggressive stance. The Dinan springs are CNC wound with high tensile chrome silicon wire and shot-peened for stress relief to last the life of the car. The increase in stiffness of the springs will reduce the rear suspension compression under acceleration and front suspension compression (or dive) under braking, giving your car a more controlled feel. The Dinan performance springs will also provide a noticeable improvement in grip for high-speed driving situations that will inspire confidence in your car's capabilities. The reduced body roll makes the steering more responsive to driver input and will be noticed at low speeds up to the top speed of the vehicle. NOTE: Dinan Performance Spring sets should be purchased and installed with the corresponding Ride Quality and Handling Kit to achieve the advertised ride height performance and ride quality. While not explicitly required, if the matching component is not purchased and installed you will get less than favorable results in the form of poor ride quality and improper handling traits. While we will maintain a full warranty on product defects any claims against the cars improper handling ride quality traits due to not purchasing the corresponding handling kit will not be warranted.

  • Provides Greater Control Over Body Roll w/Calibrated Spring Rates
  • Improves Suspension Geometry And Even More Aggressive Stance
  • CNC Wound w/High Tensile Chrome Silicon Wire
  • Shot Peened For Stress Relief To Last The Life Of The Car
  • Spring Stiffness Reduces The Rear Suspension Compression
  • Gives Your Car More Controlled Feel
  • Provides Noticeable Improvement In Grip / For High Speed Driving
  • Body Roll Makes The Steering More Responsive To Driver Input
  • Decreases Body Roll From Higher Spring Rates
  • Preset To Prevent Spring Sag
  • Lowers The Vehicle 1/2 in. In Front And 1/2 in. In The Rear

Brand: Dinan
Dinan Point Value: 2
Emission Code: 5
Height: 10
Labor Time (Hours): 5.4
Length: 14
Product Type: Springs
Warning: California Proposition 65
Weight: 27.5
Width: 14

Extra Information

Brand:
Dinan
Stock:
6
Vendor:
Holley - CSR
SpecialOrder:
False
CarbRejected:
False
CouponIsOn:
False
StockEta:
N/A
ProfitMargin:
8.300
CostOfItem:
239.85
ItemPopularity:
0
MapPrice:
278.96
RetailPrice:
348.95
EbayAllowed:
False
WarehouseStock:
6
ShippingGroups:
["Flatrate_Holley"]
EbayPrice:
286.99
ShipperHq:
{"shipping-groups":["Holley","FreeShipping"],"shipping-origins":[],"shipping-dimensional-rules":[]}
IsReturnable:
True
EbayPriority:
0

Warranty Information

[{"BaseVehicleId":19124},{"BaseVehicleId":28764},{"BaseVehicleId":28999},{"BaseVehicleId":29002},{"BaseVehicleId":30047},{"BaseVehicleId":30395},{"BaseVehicleId":96004},{"BaseVehicleId":96008},{"BaseVehicleId":96145},{"BaseVehicleId":96149},{"BaseVehicleId":118625},{"BaseVehicleId":122752},{"BaseVehicleId":19124,"SubModelId":20,"EngineBaseId":2053},{"BaseVehicleId":28999,"SubModelId":20,"EngineBaseId":2053},{"BaseVehicleId":30047,"SubModelId":20,"EngineBaseId":2053},{"BaseVehicleId":96004,"SubModelId":20,"EngineBaseId":2053},{"BaseVehicleId":96145,"SubModelId":20,"EngineBaseId":2053},{"BaseVehicleId":118625,"SubModelId":20,"EngineBaseId":2053},{"BaseVehicleId":122752,"SubModelId":20,"EngineBaseId":2053},{"BaseVehicleId":28764,"SubModelId":20,"EngineBaseId":180},{"BaseVehicleId":29002,"SubModelId":20,"EngineBaseId":180},{"BaseVehicleId":30395,"SubModelId":20,"EngineBaseId":180},{"BaseVehicleId":96008,"SubModelId":20,"EngineBaseId":180},{"BaseVehicleId":96149,"SubModelId":20,"EngineBaseId":180}]