Detroit Speed 090221DS - 24.5 in. Detroit Tuned Power Rack and Pinion

Detroit Speed - 090221DS

Detroit Speed 24.5 in. Detroit Tuned Power Rack and Pinion

Detroit Speed Hydroformed Subframe

Detroit Speed's rack and pinions have been optimized to provide an exceptional modern performance feel on the street and on the track and are available in both standard and narrow widths. The standard width is 24.5" and the narrow width being 21.5". This is one of the only racks with a 21.5" width in the aftermarket industry!

• High Pressure Fitting Thread: 9/16"-18
• 'Detroit Tuned' valving specifically to provide the increased effort and performance feel found in late model performance vehicles.
• Outer Tie Rod Thread Size: 9/16"-18
• Input Shaft: 3/4"-36
• Inner Tie Rod Ball-to-Ball Width: 24.5 inches
• Linear Rack Travel: 4.5 inches
• Recommended Flow Rate: 3 gal/min.
• Overall Width: 45 inches
• Mounting Bolt Span: 15.5 inches
• Mounting Bolt Size: 9/16 inch
• Maximum Peak System Pressure: 1800 psi
• Outer Tie Rod Thread Length: 6 inches
• Centerline of Rack Housing to Centerline of Driver's Side Mount: 8.77 inches
• Number of Turns Lock-to-Lock: 2.5 (spacers can be removed inside the boots on both sides to allow 5.5-inches of linear travel and 3 turns lock-to-lock)
• Low Pressure Fitting Thread: 5/8"-18
• All new components
• Every rack undergoes a rigorous quality check and is performance tested prior to being packaged.
• Includes polyurethane mounting bushings.
• Features an internal, inner tie rod boot balance tube.