Canton - 15-242T
Engine Oil Pan - Street / Strip / Road Race - Rear Sump - 6 qt - 7.5 in Deep - Steel - Cadmium - Small Block Chevy - 1 Piece Seal - GM F-Body 1993-97 - Each
Canton 15-242T Oil Pan Small Block Chevy 1993-1997 F Body Road Race Pan
This road race pan is for '86 and newer SBC blocks in '93-'97 F-Bodies. (also fits Impalas) It has a 7-1/2" deep, 12" wide, 8-1/4" long sump for a 6 qt. system capacity. Will work with stock starter. This pan requires one of our pickups.
- Triple Trap Door Baffle
- Crank Scraper
- Built In Screen Windage Tray
- 1/2" NPT Temperature Bung
- Provision for Pan Mounted Dipstick
- Magnetic Drain Plug
- 20mm Fitting for Low Warning Sender
Baffled: Yes
Kicked Out: Yes
Stoke: 3.75 inches
Recommended Accessory 7: 88-100T ? SBC 86+ Oil Pan Gasket
Recommended Accessory 6: 22-405 - 20MM Plug for Oil Level Sender Port
Recommended Accessory 5: 20-021 - Bolt-On Pickup for Melling M10555 Pumps
Recommended Accessory 4: 20-023 - Pickup for SBC High Volume Oil Pump M155HV with 3/4" Inlet
Recommended Accessory 3: 20-020 - Pickup for SBC High Volume Oil Pump M55HV
Recommended Accessory 2: 20-013 - Pickup for SBC Standard Volume Oil Pump M155 with 3/4" Inlet
Recommended Accessory 1: 20-010 - Pickup for SBC Standard Volume Oil Pumps M55 & M55A
Pickup Included: No
Material: 16 Gauge Steel
Hardware Included: No
Capacity: 6 Quart System Capacity
Gasket or Seal Included: No
Finish: Silver Plating
Feature 5: 20mm Fitting for GM Low Oil Warning Sender
Feature 4: 1/2" NPT Temperature Bung
Feature 3: Bolt in Windage Tray
Feature 2: Crank Scraper
Feature 1: Trap Door Baffle for Oil Control
Engine: For S.B. Chevy 1986 and newer blocks with one piece seal
Drain Plug Included: Yes
Dipstick Port: No
Crank Scraper Included: Yes
Windage Tray Included: Yes
[{"BaseVehicleId":3102},{"BaseVehicleId":3103},{"BaseVehicleId":3104},{"BaseVehicleId":3105},{"BaseVehicleId":3106},{"BaseVehicleId":3353},{"BaseVehicleId":3354},{"BaseVehicleId":3355}]