null
  • Home
  • Canton 15-240 - Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan

Canton 15-240 - Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan

Write a Review
SKU:
BGTF-15-240
Canton 15-240 - Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan

Description

Canton - 15-240

Engine Oil Pan - Street / Strip / Road Race - Rear Sump - 7 qt - 7 in Deep - Steel - Cadmium - 2 Piece Seal - Small Block Chevy - Chevy Corvette 1984-96 - Each

Canton 15-240 Oil Pan Small Block Chevy Corvette Pre-1980 Road Race Pan

This SBC Corvette road race pan is for pre-?80 blocks with left side dipstick. It is designed for 84-96 Corvettes, but will fit in early Corvettes as well. It has a 7" deep, 13-3/4" wide, 12" long sump, with a 7 quart system capacity. Will work with stock starters. This pan requires one of our pickups.

  • Five Trap Door Baffles
  • Crank Scraper
  • Built In Screen Windage Tray
  • 1/2" NPT Temperature Bung
  • Provision For Our Pan Mounted Dipstick
  • Magnetic Drain Plug
  • Includes a 20MM fitting For A Low Oil Warning Sender (Purchase 22-405 Plug if not using sender)

Baffled: Yes
Material: 16 Gauge Steel
Sump Width: 13.75 inches
Sump Depth: 7 inches
Stoke: 3.75 inches
Recommended Accessory 8: 88-100 - SBC Pre ?85 Oil Pan Gasket
Recommended Accessory 7: 22-405 - 20MM Plug for Oil Level Sender Port
Recommended Accessory 6: 20-854 - Universal Steel Braided Dipstick Kit 1/4" N.P.T. Fitting
Recommended Accessory 5: 20-850 - Universal Dipstick Kit 1/4" N.P.T. Fitting
Recommended Accessory 4: 20-079 - Pickup for SBC High Volume Oil Pump M155HV with 3/4" Inlet
Recommended Accessory 3: 20-074 - Pickup for SBC High Volume Oil Pump M55HV
Recommended Accessory 2: 20-049 - Pickup for SBC Standard Volume Oil Pump M155 with 3/4" Inlet
Recommended Accessory 1: 20-044 - Pickup for SBC Standard Volume Oil Pumps M55 & M55A
Pickup Included: No
Kicked Out: Yes
Capacity: 7 Quart System Capacity
Hardware Included: No
Gasket or Seal Included: No
Finish: Silver Plating
Feature 6: 20mm Fitting for GM Low Oil Warning Sender
Feature 5: Provision for Pan Mounted Dipstick
Feature 4: 1/2" NPT Temperature Bung
Feature 3: Bolt in Windage Tray
Feature 2: Crank Scraper
Feature 1: Trap Door Baffle for Oil Control
Engine: For S.B. Chevy Pre-1980 Blocks
Drain Plug Included: Yes
Dipstick Port: Yes
Crank Scraper Included: Yes
Windage Tray Included: Yes

Extra Information

Brand:
Canton
Stock:
0
Vendor:
Motor State - CSR
SpecialOrder:
False
CarbRejected:
False
CouponIsOn:
True
StockEta:
N/A
ProfitMargin:
15.900
CostOfItem:
408.69
ItemPopularity:
0
MapPrice:
498.00
RetailPrice:
597.60
EbayAllowed:
False
WarehouseStock:
0
ShippingGroups:
["Flatrate_Motor State"]
EbayPrice:
498
ShipperHq:
{"shipping-groups":["FreeShipping","Flatrate_Motor State"],"shipping-origins":[],"shipping-dimensional-rules":[]}

Warranty Information

[{"BaseVehicleId":3217},{"BaseVehicleId":3218},{"BaseVehicleId":3219},{"BaseVehicleId":3220},{"BaseVehicleId":3208},{"BaseVehicleId":3221},{"BaseVehicleId":3222},{"BaseVehicleId":3223},{"BaseVehicleId":3224},{"BaseVehicleId":3209},{"BaseVehicleId":3225},{"BaseVehicleId":3226},{"BaseVehicleId":3227},{"BaseVehicleId":14080},{"BaseVehicleId":14081},{"BaseVehicleId":14082},{"BaseVehicleId":14083},{"BaseVehicleId":14084},{"BaseVehicleId":14085},{"BaseVehicleId":14086},{"BaseVehicleId":3234},{"BaseVehicleId":3235},{"BaseVehicleId":3211},{"BaseVehicleId":3212},{"BaseVehicleId":3213},{"BaseVehicleId":3214},{"BaseVehicleId":3215},{"BaseVehicleId":3216}]

Related Products