Description
AWE - 3025-41392
AWE SwitchPath Exhaust for Wrangler 392 - Quad BashGuards
A dual 3” catback exhaust designed and engineered specifically for the big one. SwitchPath™ for the Wrangler 392 features a bespoke resonated H-pipe configured to enhance and amplify the rage of the 6.4L while keeping the inherent rasp in check. Tucked high, the exhaust transitions smoothly to the rear where it splits off into a tailored SwitchPath™ muffler complete with OE tier 1 valves to ensure 100% factory valve operation. Control the behavior at any time via the dash button, or let the ECU crack ‘em open when you reach the designated throttle input. Interior acoustics are sophisticated at every speed with SwitchPath™–no drone, no funny business–just pure HEMI without the headache. BashGuard™ brings up the rear, providing over 3” of increased clearance compared to the factory exhaust while featuring a .125” thick reinforced stainless ring on each outlet tucked high out of reach even on the most drastic departure angles. Each SwitchPath™ Catback Exhaust comes with hanger locking collars to keep everything aligned so you can send it with confidence, and custom heat shielding to keep temps underwraps in the back. AWE’s Lifetime Warranty, Perfect Fitment Guarantee, and No CEL Guarantee come standard. Let’s rock.
- 50-state emissions-compliant dual 3” catback exhaust
- Engineered to crawl with best-in-class clearance on even the most aggressive departure angles
- OEM valves ensure 100% factory operation via interior button and throttle input
- Bespoke SwitchPath™ muffler provides dual soundtracks: sophisticated with valves closed, rowdy with them open
- Resonated H-pipe for deep, aggressive tone with minimal rasp
- Quad outlet, each protected by BashGuard™
- BashGuard™ features a .125” thick reinforced stainless ring on the outlet, built for bashing
- Features locking collars for exhaust hangers to prevent movement
- Includes heat shielding for the passenger side trunk pan
- Handcrafted from CNC mandrel-bent, U.S.-sourced .065”-wall T304L stainless steel
- Dyno verified gains of 9 hp and 5 ft-lbs of torque at the wheels
- Less is more: clean, straight-through design for maximum performance and tone
- Proudly engineered, designed, and manufactured in-house, in the USA
- Pure bolt-on, no-cutting required
- Perfect Fitment Guarantee
- AWE No CEL Guarantee
- Lifetime warranty
Extra Information
Warranty Information
[{"BaseVehicleId":153428,"SubModelId":6234,"EngineBaseId":4265},{"BaseVehicleId":156124,"SubModelId":6234,"EngineBaseId":4265},{"BaseVehicleId":164467,"SubModelId":6234,"EngineBaseId":4265},{"BaseVehicleId":169645,"SubModelId":6234,"EngineBaseId":4265},{"VehicleId":281318},{"VehicleId":282203},{"VehicleId":352663},{"VehicleId":360155}]
